The L360 Cycle Controller provides a rugged, all-pneumatic control of pump cycle times for the Programmable Genie®, Ferret® and Pulse Pump®. The L360 is especially suited to sites where no electronics are allowed, or where pump cycle rates exceed the limits of the C100M in solar mode. The L370 LevelMate can be used with the L360 to shut off the system when the well level drops below the set point.
Air Requirements
For best results with all controllers, 2-3 scfm (3.4-5.1 m3/h) per Pulse Pump and 1-2 scfm (1.7-3.4 m3/h) per Eliminator at 100 psi (700 kPa) of clean, dry air supply is required. 10 micron filtration, <10 ppm oil, dew point 20 ˚F (11 ˚C) below minimum operating temperature. Maximum total system discharge head is 230 ft. (70 m) of water.
See the complete Free Product Recovery catalog