Remediation Bladder Pump Specifications
|
Eliminator 2"
|
|
Eliminator 4" | |
| Model No. | 301301 |
301311 |
LP1702 |
| Pump Type | Pneumatic bladder | Pneumatic bladder | Pneumatic bladder |
| Inlet | Top or Bottom | Top or Bottom | Top or Bottom |
| Outside Diameter | 1.7 in. (4.3 cm) |
1.7 in. (4.3 cm) |
3 in. (7.5cm) |
| Length | 57 in. (145 cm) | 82 in. (208 cm) | 40 in. (102cm) |
| Weight | 3.5 lb (1.6 Kg) | 3.5 lb (1.6 Kg) | 11.5 lbs. (5.2 kg) |
| Material |
Stainless Steel, brass,
Viton®, Teflon®, urethane bladder
|
Stainless Steel, brass,
Viton®, Teflon®, urethane bladder
|
Stainless Steel, Q-Tal, GeoLast bladder, Viton® o-rings
|
| Fittings | Brass quick-connects | Brass quick-connects | Brass barbs |
| Fitting Sizes |
Liquid Discharge:
1/4 in. (.64 mm) Air Supply:
1/4 in. (.64 mm) |
Liquid Discharge:
1/4 in. (.64 mm) Air Supply:
1/4 in. (.64 mm) |
Liquid Discharge:
3/4 in. (19 mm) Air Supply:
1/2 in. (13 mm) |
| Volume per Cycle |
0.03 gal. (125 mL)
|
.06 gal. (245 mL) |
0.53 gal. (2000ml) |
| Operating Pressure | 40-100 psi (2.8-6.9 bar) | 40-100 psi (2.8-6.9 bar) | 40-100 psi (2.8-6.9 bar) |
| Maximum Lift | 150 ft. (46 m) |
150 ft. (46 m) |
230 ft. (70 m) |
| Maximum Flow Rate | .135 gpm (.51 Lpm) |
.260 gpm (.983 Lpm) |
6 gpm (23 Lpm) |
| Minimum Submergence | 3 in. (7.6 cm) |
3 in. ((7.6 cm) |
18 in. (45.6 cm) |
| Density of Pumped Liquid | Any |
Any |
Any |
| Cap Sizes |
2, 3, 4, 5, 6 and 8 in.
(50, 75, 100, 125, 150 and 200 mm)
|
2, 3, 4, 5, 6 and 8 in.
(50, 75, 100, 125, 150 and 200 mm)
|
2, 3, 4, 5, 6 and 8 in.
(50, 75, 100, 125, 150 and 200 mm)
|
| PDF Specs |
 |
|
|