The new Easy Level makes it easy to see if the liquid level has exceeded the maximum level desired.

The Easy Level is faster and easier than traditional liquid level measurement with portable tapes. If the liquid level rises above the chosen set point, the bright orange indicator will appear in the Easy Level’s clear dome top. If there is a pump in the well, the high level indication signifies excess liquid inflow rates or that the pump may need service. For wells without pumps, a high level may indicate that a pump is needed to maintain the liquid level below regulatory limits or improve gas collection efficiency.

Many tanks, sumps and pits are difficult or hazardous to access and monitor for liquid level. The new Easy Level system provides a clear visual warning if the liquid level rises above a selected trigger point or falls below it. The Easy Level indicator requires no battery or electric power supply, so it is safe and easy to install. All that is required is running a 1/4” tube from the probe to the indicator.

▼ Learn more about the Easy Level

The Easy Bolt provides the function of conventional nuts and bolt sets, but uses a simple lever action instead of wrenches. The Easy Bolt fits through the flange bolt holes and is tightened by simply pushing the cam lever down. Easy Bolts are constructed of high quality stainless steels, with an investment cast lever.

QED’s New Easy Bolt lowers the cost of flange installation and removal

• Faster
• No Tools
• No corrosion or galling failures

Do your field crews spend too much time and money on:

• Removing nuts and bolts?
• Sawing and replacing galvanized nuts and bolts that have corroded?
• Sawing and replacing stainless steel nuts and bolts that have galled?

With Easy Bolt, you can forget the saws and wrenches

▼ Learn more about the Easy Bolt

▼ Dissimilar Stainless Steels to Prevent Galling

▼ Self-Locking, Over-Centered Cam Design

▼ Self-Centering Swivel, Automatically Swivels into Position

The Easy Fitting is a new type of lower-cost, quick fitting for the AutoPump, designed for severe duty downwell conditions at landfills and remediation sites. The Easy Fitting allows the AutoPump to be quickly disconnected from its tubing and hose sets, eliminating the need to cut the tubing. Constructed of high-quality, stainless steels the Easy Fitting is designed to function well even with silt and solids present.

The New Easy Fitting from QED lowers the cost of disconnecting & reconnecting tubing when cleaning pumps

• Faster
• No Clamp removal/replacement
• No need to cut the tubing shorter every time a pump is removed for cleaning

Do your field crews spend too much time and money on:

• Cutting tubing from the pump’s barbed fittings during pump removal?
• Removing and replacing tubing clamps?
• Precision cutting the air, exhaust and liquid discharge tubing for proper alignment?

With Easy Fitting, tubing cutters and clamps are needed only for the initial installation

▼ Learn more about the Easy Fitting

▼ No need to cut the tubing shorter every time a pump is removed for cleaning

Hundreds of wellhead cap and flange combinations are available from QED on a standard and custom basis to fit site needs and ease installation and service. Common features include quick-connect fittings, sealing versions for use with vacuum extraction, well access ports for level or other uses, and means for adjusting the pump level. Our cap assemblies are based on our 20 years of experience and thousands of installations, call QED for more detailed information and guidance on the best cap choice for your project.

▼ Learn more about wellheads, caps and flanges